TM 9-2320-365-20-4
16-30. M1079 DOOR SEAL, RETAINER, AND LATCH STRIKER REPLACEMENT
This task covers:
a. Door Seal and Retainer Removal
b. Door Seal and Retainer Installation
c. Latch Striker Removal
d. Latch Striker Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
LH and RH doors opened (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Drill, Electric, Portable (Item 7, Appendix C)
Drill Twist (Item 6, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Rivet, Blind (3) (Item 233, Appendix G)
Sealing Compound (Item 67, Appendix D)
Seal, Door (Item 250, Appendix G)
Lockwasher (2) (Item 82, Appendix G)
a. Door Seal and Retainer Removal.
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
NOTE
Top and bottom door seal and retainer are
removed the same way. Top door seal and
retainer shown.
(1) Remove three rivets (1) and door seal retainer (2) from
door jam (3).
(2) Remove door seal (4) from door jam (3). Discard door
seal.
(3) Remove sealing compound from door jam (3).
16-173
