TM 9-2320-365-20-4
16-29. M1079 RUBBER BUMPER AND TEE LATCH REPLACEMENT (CONT)
c. Tee Latch Removal.
NOTE
Left and right side tee latches are removed
the same way. Left side shown.
(1) Remove sealing compound from edges of tee latch (1)
and heads of four screws (2).
(2) Remove four screws (2), lockwashers (3), washers (4),
and tee latch (1) from van body (5).
Discard
lockwashers.
(3) Remove sealing compound from van body (5) and tee
latch (1).
d. Tee Latch Installation.
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
NOTE
Left and right side tee latches are installed
the same way. Left side shown.
(1) Apply sealing compound on tee latch (1).
(2) Install tee latch (1) on van body (5) with four washers
(4), lockwashers (3), and screws (2).
(3) Apply sealing compound on edges of tee latch (1) and
heads of screws (2).
End of Task.
16-172
