TM 9-2320-365-20-4
16-34. M1079 LADDER, MOUNTING BRACKET, AND STOWAGE BRACKET
REPLACEMENT/REPAIR
This task covers:
a. Ladder Mounting Bracket Removal
b. Ladder Mounting Bracket Installation
c. Ladder Stowage Bracket Removal
d. Ladder Stowage Bracket Installation
e Ladder Disassembly
f. Ladder Assembly
gFollow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Ladder removed (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Drill, Portable Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Sealing Compound (Item 59, Appendix D)
Lockwasher (4) (Item 83, Appendix G)
Lockwasher (3) (Item 941, Appendix G)
Rivet, Blind (Item 219, Appendix G)
Rivet, Blind (Item 225, Appendix G)
Rivet, Blind (2) (Item 235, Appendix G)
a. Ladder Mounting Bracket Removal.
Remove four screws (1), lockwashers (2), and ladder
mounting bracket (3) from van body (4).
Discard
lockwashers.
b. Ladder Bracket Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply sealing compound to threads of four screws (1).
(2) Install ladder mounting bracket (4) on van body (3) with
four lockwashers (2) and screws (1).
16-184
