TM 9-2320-365-20-4
16-34. M1079 LADDER, MOUNTING BRACKET, AND STOWAGE BRACKET
REPLACEMENT/REPAIR (CONT)
d. Ladder Stowage Bracket Installation.
NOTE
• Left and right ladder stowage brackets are
installed the same way. Left ladder stowage
bracket shown.
• Perform steps (1) through (4) on left ladder
stowage bracket.
(1) Install quick release pin (1) in ladder stowage bracket
(2).
(2) Install split ring (3) on quick release pin (1).
(3) Install split ring (3) on lanyard (4).
(4) Install lanyard (4) on ladder stowage bracket (2) with
rivet (5).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(5) Apply sealing compound to threads of three screws (6).
(6) Install ladder stowage bracket (2) on van body (7) with
three washers (8), lockwashers (9), and screws (6).
16-186
