TM 9-2320-365-20-4
16-39. M1079 WINDOW SASH ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Window cover stowed (van bodies serial
number 191 and higher) (TM 9-2320-365-10).
LH and RH doors opened (115 degrees) (TM 9-
2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Materials/Parts
Rivet, Blind (4) (Item 225, Appendix G)
Adhesive (Item 9, Appendix D)
M1079 Window Sash Top/Bottom Glazing Seal (2)
(Item E-8, Appendix E)
M1079 Window Sash Side Glazing Seal (2) (Item E-8,
Appendix E)
Personnel Required
(2)
a. Removal.
NOTE
• Van body serial numbers 001 through 190 are
equipped with five window sash assemblies 30
in. (760 mm) tall. Van bodies serial numbers
191 and higher are equipped with four window
sash assemblies 14 in. (355 mm) tall.
• All window sash assemblies are removed the
same way. Left front window sash assembly on
van body serial number 191 shown.
(1) Remove screen (1) from window main frame (2).
16-236
