TM 9-2320-365-20-4
d. Installation.
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
CAUTION
Coat all rivets with sealing compound prior to
installation. Failure to comply may result in
damage to equipment.
NOTE
• All blackout shields and frames are installed the
same way. Left front blackout shield and frame
on van body serial number 191 shown.
• Perform steps (1) and (2) on van bodies serial
number 191 and higher.
(1) Apply sealing compound to 17 rivets (1).
(2) Install blackout shield assembly (2) on van body wall (3)
with 17 rivets (1).
NOTE
Perform steps (3) and (4) on van body serial
numbers 001 through 190.
(3) Apply sealing compound to 29 rivets (1).
(4) Install blackout shield assembly (2) on van body wall (3)
with 29 rivets (1).
16-231
