TM 9-2320-365-20-4
16-37. M1079 BLACKOUT SHIELD AND FRAME REPLACEMENT/REPAIR (CONT)
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(8) Apply adhesive on left and right jamb frames (14 and
15).
(9) Install two seals (16) in left and right jamb frames (14
and 15).
(10) Install two stops (17) in left and right jamb frames (14
and 15) with two screws (18).
(11) Install right jamb frame (15) on header frame (10) with
two screws (19).
(12) Install blackout shield (2) in right jamb frame (15).
(13) Install left jamb frame (14) on header frame (10) with two
screws (20).
(14) Close blackout shield (2).
16-230