TM 9-2320-365-20-4
16-37. M1079 BLACKOUT SHIELD AND FRAME REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
LH and RH doors opened (115 degrees) (TM 9-
2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Drill, Portable, Electrical (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Materials/Parts
Lockwasher (2) (Item 77, Appendix G)
Rivet, Blind (17) (van bodies serial number 191 and
higher) (Item 218, Appendix G)
Rivet, Blind (29) (van body serial numbers 001 through
190) (Item 218, Appendix G)
Nut, Self-Locking (2) (Item 122, Appendix G)
M1079 Blackout Shield Header Seal (Item E-6,
Appendix E)
M1079 Blackout Shield Jamb Seal (2) (Item E-6,
Appendix E)
Sealing Compound (Item 67, Appendix D)
Seal, Weather (Item 259, Appendix G)
Tape, Adhesive (Item 72, Appendix D)
Adhesive (Item 5, Appendix D)
a. Removal.
NOTE
All blackout shields and frames are removed
the same way. Left front blackout shield and
frame on van body serial number 191 shown.
(1) Remove two screws (1), lockwashers (2), washers (3)
and bracket (4) from van body wall (5).
Discard
lockwashers.
16-226
