TM 9-2320-365-20-4
c. Assembly.
(1) Install weather seal (1) in blackout shield (2).
(2) Install bracket (3) on blackout shield (2) with two screws
(4), washers (5), and self-locking nuts (6).
(3) Install tape (7) on latch (8).
(4) Install latch (8) on blackout shield (2) with screw (9).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(5) Apply adhesive on header frame (10).
(6) Install seal (11) in header frame (10).
(7) Install bracket (12) on header frame (10) with two screws
(13).
16-229