TM 9-2320-365-20-4
b. Installation.
(1) Install insulation sleeving (1) on wires 401 (2), 3086C
(3), and 1499R (4).
(2) Strip approximately 1/4 in. (6 mm) of insulation from
wires 401 (2), 3086A (3), and 1499R (4).
(3) Solder wire 401 (2) to connector J245C (5).
(4) Solder wire 3086C (3) to connector J245B (6).
(5) Solder wire 1499R (4) to connector J245A (7).
(6) Shrink insulation sleeving (1) on wires 401 (2), 3086C
(3), and 1499R (4).
(7) Install connector J245 (8) in raceway (9) with three
screws (10), lockwashers (11), and nuts (12).
Change 1
16-297