TM 9-2320-365-20-4
b. Disassembly.
NOTE
Remove plastic cable ties as required.
(1) Remove wires 3085X, 415A, and 1499H (1, 2, and 3)
from conduit connector (4).
(2) Remove locknut (5) and conduit connector (4) from fan
shroud (6).
(3) Remove four screws (7), lockwashers (8), washers (9),
and fan assembly (10) from fan shroud (6). Discard
lockwashers.
(4) Remove four screws (11), lockwashers (12), washers
(13), and two brackets (14) from fan assembly (10).
Discard lockwashers.
c. Assembly.
(1) Install two brackets (1) on fan assembly (2) with four
washers (3), lockwashers (4), and screws (5).
16-443
