TM 9-2320-365-20-4
16-67. M1079 FAN ASSEMBLY REPLACEMENT/REPAIR
NOTE
Install plastic cable ties as required.
(2) Install fan assembly (2) in fan shroud (6) with four
washers (7), lockwashers (8), and screws (9).
(3) Install conduit connector (10) in fan shroud (6) with
locknut (11).
(4) Route wires 1499H, 415A, and 3085X (12, 13, and 14)
through conduit connector (10).
WARNING
d. Installation.
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply sealing compound to van body wall (1).
(2) Install four seals (2) on van body wall (1).
(3) Install pipe nipple (3) on outlet box (4).
(4) Install conduit elbow (5) on pipe nipple (3).
(5) Position conduit nuts (6 and 7) and ferrules (8) on
conduit (9).
(6) Position conduit nut (6) and conduit (9) on conduit elbow
(5).
16-444
