TM 9-2320-365-20-4
16-68. M1079 110/208 VAC POWER IN/OUT CABLE REPLACEMENT
This task covers:
a. 110/208 VAC POWER IN Connector Removal
b. 110/208 VAC POWER IN Connector Installation
c. 110/208 VAC POWER OUT Connector Removal
d. 110/208 VAC POWER OUT Connector
Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Field telephone wires disconnected, if required, (TM
9-2320-365-10).
AC power disconnected (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
LH and RH door opened (115 degrees) (TM 9-2320-
365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Sealing Compound (Item 67, Appendix D)
Lockwasher (16) (van bodies serial number 191
and higher) (Item 77, Appendix G)
Lockwasher (28) (van body serial numbers 001
through 190) (Item 77, Appendix G)
Lockwasher (8) (Item 78, Appendix G)
Lockwasher (2) (Item 85, Appendix G)
Personnel Required
(2)
a. 110/208 VAC POWER IN Connector Removal.
NOTE
Perform step (1) on van body serial numbers
001 through 190.
(1) Remove 28 screws (1), lockwashers (2), washers (3),
and cover (4) from 110/208 vac power entry panel (5).
Discard lockwashers.
16-449