TM 9-2320-365-20-4
NOTE
If straight shaft is being replaced, a
replacement spring pin must be installed.
(13) Apply grease to straight shaft (18) and inside of fairlead
roller (19).
NOTE
Install straight shaft so that lubrication fitting
faces toward bottom.
(14) Install fairlead roller (19) and straight shaft (18) in roller
bracket (5).
(15) Install retaining pin (20) through roller bracket (5) and
straight shaft (18).
(16) Install four lubrication fittings (21) in straight shafts (1, 2,
7, and 18).
(17) Deleted
Change 1
17-13
