TM 9-2320-365-20-4
17-3. 11K SELF-RECOVERY WINCH (SRW) REAR ROLLER FAIRLEAD REPLACEMENT
(CONT)
(4) Apply grease to straight shaft (7) and inside of fairlead
roller (8).
NOTE
• Install straight shaft so that lubrication fitting
faces toward bottom.
• Align hole in straight shaft with hole in bracket.
(5) Install fairlead roller (8) and straight shaft (7) in roller
bracket (5).
(6) Install spring pin (9) through roller bracket (5) and
straight shaft (7).
(7) Position roller bracket (5) and taillight bracket (10) on
mounting bracket (11) with two screws (12) and self-
locking nuts (13).
(8) Position two screws (14) in mounting bracket (11) with
two self-locking nuts (15).
(9) Position two screws (16) in taillight bracket (10) with two
self-locking nuts (17).
(10) Tighten two screws (12) to 149-182 lb-ft (202-247 N·m).
(11) Tighten two self-locking nuts (15) to 149-182 lb-ft (202-
247 N·m).
(12) Tighten two screws (16) to 26-32 lb-ft (35-43 N·m).
17-12
