TM 9-2320-365-20-4
17-3. 11K SELF-RECOVERY WINCH (SRW) REAR ROLLER FAIRLEAD REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
11K SRW cable removed from rear roller fairlead, if
required (TM 9-2320-365-10).
Right composite taillight assembly removed (para 7-
32).
Right marker light assemblies removed (para 7-31).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Gun, Lubricating (Item 16, Appendix C)
Wrench, Set Socket (Item 48, Appendix C)
Materials/Parts
Grease, Automotive and Artillery (GAA) (Item 23
Appendix D)
Nut, Self-Locking (4) (Item 144, Appendix G)
Nut, Self-Locking (2) (Item 140, Appendix G)
Pin, Spring (3) (Item 210, Appendix G)
Pin, Spring (Item 211, Appendix G)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
a. Removal.
(1) Pull rear lights cable assembly (1) through right frame
rail (2).
Change 1
17-7
