TM 9-2320-365-20-4
17-2. 11K SELF-RECOVERY WINCH (SRW) FRONT ROLLER FAIRLEAD REPLACEMENT
(CONT)
(8) Apply grease to straight shaft (9) and inside of roller
fairlead (10).
NOTE
• Install straight shaft so that lubrication
fitting is toward bottom.
• Align hole in straight shaft with hole in
bracket.
(9) Install roller fairlead (10) and straight shaft (9) in bracket
(3).
(10) Install spring pin (11) through bracket (3) and straight
shaft (9).
(11) Apply grease to straight shaft (12) and inside of roller
fairlead (13).
NOTE
Install straight shaft so that lubrication fitting
is toward bottom.
(12) Install roller fairlead (13) and straight shaft (12) in
bracket (3).
NOTE
Align hole in straight shaft with hole in
bracket.
(13) Install retaining pin (14) through bracket (3) and straight
shaft (12).
(14) Install two lubrication fittings (15) in straight shafts (9 and
12).
c. Follow-On Maintenance.
(1) Lower cab (TM 9-2320-365-10).
(2) Install front bumper and gravel deflector (para 14-2).
(3) Lubricate front rollers (Appendix H).
End of Task.
17-6
