TM 9-2320-365-20-4
Section II. MAINTENANCE PROCEDURES
17-2. 11K SELF-RECOVERY WINCH (SRW) FRONT ROLLER FAIRLEAD REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Front bumper and gravel deflector removed
(para 14-2).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Gun, Lubricating (Item 16, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Grease, Automotive and Artillery (GAA) (Item 23,
Appendix D)
Pin, Spring (2) (Item 210, Appendix G)
Pin, Spring (Item 211, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
(1) Remove two lubrication fittings (1) from straight shafts (2
and 3).
(2) Remove retaining pin (4) from straight shaft (2).
CAUTION
Use a brass punch to remove straight shafts.
Failure to comply may damage threads for
lubrication fittings.
(3) Remove straight shaft (2) and roller fairlead (5) from
bracket (6).
17-2
