TM 9-2320-365-20-4
17-5. 11K SELF-RECOVERY WINCH (SRW) CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
11K SRW cable payed-out completely from front of
vehicle (TM 9-2320-365-10).
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Gloves, Welder’s (Item 14, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Personnel Required
(3)
WARNING
• Wear leather gloves at all times when
handling cable. Do not allow cable to slide
through hands even with gloves on. Broken
wires may cause injury. Failure to comply
may result in injury to personnel.
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
a. Removal.
(1) Remove cable wedge (1) and 11K SRW cable (2) from
flange (3).
(2) Pull 11K SRW cable (2) from flange (3).
(3) Remove 11K SRW cable (2) from drum (4).
17-19
