TM 9-2320-365-20-4
(3) Route 11K SRW cable (1) through cable guides (5 and
6) behind fuel tank (7).
(4) Route 11K SRW cable (1) over cable guide roller (8).
NOTE
Position 11K SRW cable on drum so it will spool
properly.
(5) Route 11K SRW cable (1) over and around drum (9).
(6) Insert 11K SRW cable (1) through slot (10) in side of
drum (9).
(7) Route 11K SRW cable (1) up through flange (11) and
back down into flange, making a loop.
(8) Insert wedge (12) in loop and pull 11K SRW cable (1)
and wedge into flange (11).
(9) Drive wedge (12) and 11K SRW cable (1) down into
flange (11) until fully seated.
17-21