TM 9-2320-365-20-4
19-3. AIR/HYDRAULIC POWER UNIT AND BRACKET REPLACEMENT/REPAIR (CONT)
(32) Install plug (53) in air intake body (54).
(33) Position preformed packing (55), and air intake body (54)
on pump (6) with two screws (56).
(34) Tighten two screws (56) to 50-60 lb-in. (6-7 N·m).
(35) Fill reservoir (57) with oil.
(36) Install gasket (58) and pump (6) on reservoir (57) with
six screws (59).
(37) Install muffler (60) on manifold body (48).
(38) Install 90-degree fitting (61) in air intake body (54).
(39) Install pressure plug (62) in manifold body (48).
(40) Install two preformed packings (63) on fittings (64).
(41) Install two fittings (64) in manifold body (48).
(42) Install dipstick (65) in manifold body (48).
19-8.8
Change 1
