TM 9-2320-365-20-4
19-3. AIR/HYDRAULIC POWER UNIT AND BRACKET REPLACEMENT/REPAIR (CONT)
(9) Install four screws (11) and self-locking nuts (12) in
decontamination unit mounting bracket (13).
(10) Position decontamination unit mounting bracket (13) on
air/hydraulic power unit mounting bracket (2) with two
washers (14) and screws (15).
(11) Position four washers (16), two screws (17), and nuts
(18) in decontamination unit mounting bracket (13).
(12) Tighten two screws (15) and nuts (18) to 18-22 lb-ft (24-
30 N·m).
f. Bracket Removal.
Remove four self-locking nuts (1), screws (2), and
air/hydraulic power unit mounting bracket (3) from spare tire
retainer (4). Discard self-locking nuts.
g. Bracket Installation.
(1) Position air/hydraulic power unit mounting bracket (3) on
spare tire retainer (4) with four screws (2) and self-
locking nuts (1).
(2) Tighten four self-locking nuts (1) to 48-58 lb-ft (65-79
N·m).
19-8.10
Change 1
