TM 9-2320-365-20-4
19-12. HYDRAULIC OIL FILTER ASSEMBLY SERVICE/REPLACEMENT
This task covers:
a. Service
b. Removal
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Pan, Drain (Item 24, Appendix C)
Materials/Parts
Filter Element, Fluid (Item 17, Appendix G)
(Service)
Seal, Plain (Item 255.1, Appendix G) (Service)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Packing, Preformed (2) (Item 162, Appendix G)
Oil, Lubricating, OE/HDO 10W (Item 44,
Appendix D)
Tape, Antiseizing (Item 73, Appendix D)
a. Service.
(1) Remove hydraulic oil filter assembly bowl (1) from filter
assembly base (2).
(2) Remove fluid filter element (3) from oil filter assembly
bowl (1). Discard fluid filter element.
(3) Remove seal (4) from hydraulic oil filter assembly bowl
(1). Discard seal.
NOTE
Apply lubricating oil to seal prior to
installation.
(4) Install seal (4) on hydraulic oil filter assembly bowl (1).
(5) Install fluid filter element (3) in hydraulic oil filter
assembly bowl (1).
(6) Install hydraulic oil filter assembly bowl (1) on filter
assembly base (2) and hand tighten.
19-58
Change 1
