TM 9-2320-365-20-4
19-13. HYDRAULIC RESERVOIR AND BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Hydraulic oil filter assembly removed (para 19-12).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
Container (30 gal (113 L) capacity)
Materials/Parts
Cap and Plug Set (Item 15, Appendix D)
Packing, Preformed (2) (Item 164, Appendix G)
Materials/Parts (Cont)
Sealing Compound (Item 62, Appendix D)
Oil, Lubricating, OE/HDO 10W (Item 44,
Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Nut, Self-Locking (Item 136, Appendix G)
Nut, Self-Locking (4) (Item 140, Appendix G)
Insulator, Tank (Item 52, Appendix G)
Insulator, Tank (Item 53, Appendix G)
Personnel Required
(2)
a. Removal.
CAUTION
Cap or plug hydraulic connections and
connection points to prevent contamination of
hydraulic system.
Failure to comply may
result in damage to equipment.
NOTE
Tag hoses and connection points prior to
disconnecting.
(1) Remove cap (1) from hydraulic reservoir (2).
(2) Position container under drain plug (3).
(3) Remove drain plug (3) from hydraulic reservoir (2) and
drain oil.
(4) Install drain plug (3) in hydraulic reservoir (2).
(5) Install cap (1) on hydraulic reservoir (2).
19-61
