TM 9-2320-365-20-4
16-6. M1081 DOOR REPAIR/ADJUSTMENT (CONT)
(12) Install door arrestor assembly (14) on cab with washer
(15), two spring washers (16), and screw (17).
(13) Install door arrestor assembly (14) on bottom of door (7)
with two screws (18).
i. Door Adjustment.
NOTE
• Steps (1) and (2) require the aid of an assistant.
• Loosen door hinge screws only enough to allow
small adjusting movements of door.
(1) Support door (1) and loosen six screws (2) on bottom
hinge (3) and top hinge (4).
(2) Adjust door (1) so that gap between door (1) and cab is
approximately equal all around.
(3) Open, close, and open door (1) to ensure correct
operation.
(4) Tighten six screws (2) on top hinge (4) and bottom hinge
(3) to 22-26 lb-ft (30-35 N·m).
16-58
