REAR CAB SUPPORT ASSEMBLY REPLACEMENT

Follow-On Maintenance - TM-9-2320-365-20-4_92

REAR CAB SUPPORT ASSEMBLY REPLACEMENT-cont.

/.5tonm1078v1-5/TM-9-2320-365-20-4 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
63

TM 9-2320-365-20-4 16-7. REAR CAB SUPPORT ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab air springs deflated (TM 9-2320-365-10). Spare tire lowered (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Nut, Self-Locking (4) (Item 149, Appendix G) Nut, Self-Locking (Item 125, Appendix G) Nut, Self-Locking (8) (Item 140, Appendix G) Personnel Required (2) a. Removal. (1) Match mark position of cab hydraulic latch (1) on rear cab support (2). (2) Remove four self-locking nuts (3), washers (4), screws (5), and cab hydraulic latch (1) from rear cab support (2). Discard self-locking nuts. (3) Remove three screws (6) and cable clamps (7) from rear cab support (2). (4) Remove self-locking nut (8) and cab leveling valve linkage (9) from rear cab support (2). Discard self- locking nut. Change 1 16-61

Privacy Statement
Press Release
Contact