TM 9-2320-365-20-5
(10) Remove screw (20), lockwasher (21), washer (22), and
terminal lug TL191 (23) from bracket (24).
Discard
lockwasher.
(11) Disconnect connector J314 (25) from heater fuel pump
power cable connector (26).
b. Installation.
(1) Connect connector J314 (1) to heater fuel pump power
cable connector (2).
(2) Install terminal lug TL191 (3) on bracket (4) with washer
(5), lockwasher (6), and screw (7).
(3) Route heater fuel pump cable (8) through hole (9) in pod
panel (10).
(4) Install grommet (11) in hole (9) on pod panel (10).
20-261
