TM 9-2320-365-20-5
20-55. 200 AMP ALTERNATOR KIT REMOVAL
This task covers:
a. Removal
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Spare tire lowered (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Vise, Machinist (Item 46, Appendix C)
Caps, Vise Jaw (Item 4, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (2) (Item 66, Appendix G)
Lockwasher (2) (Item 65, Appendix G)
Nut, Self-Locking (2) (Item 139, Appendix G)
Nut, Self-Locking (M1081) (2) (Item 140, Appendix G)
Materials/Parts
Washer, Spring (M1081) (2) (Item 280, Appendix
G)
Nut, Self-Locking (all models except M1081) (3)
(Item 140, Appendix G)
Lockwasher (8) (Item 92, Appendix G)
Nut, Self-Locking (8) (Item 146, Appendix G)
Lockwasher (2) (Item 101, Appendix G)
Terminal, Lug (Item 265, Appendix G)
Terminal, Lug (Item 264, Appendix G)
Lockwasher (Item 98, Appendix G)
Nut, Self-Locking (Item 130, Appendix G)
Nut, Self-Locking (Item 131, Appendix G)
Nut, Self-Locking (Item 129, Appendix G)
Lockwasher (2) (Item 92, Appendix G)
Personnel Required
(2)
a. Removal.
(1) Loosen clamp (1) on air compressor intake hose (2).
(2) Remove air compressor intake hose (2) from intake air
cleaner boot (3).
(3) Loosen clamp (4) on intake air cleaner boot (3).
(4) Remove intake air cleaner boot (3) from intake air
cleaner housing (5).
20-334
Change 1
