TM 9-2320-365-20-5
NOTE
• Perform steps (5) through (27) on M1081.
• Remove plastic cable ties as required.
(5) Lift dust boot (6) on terminal lug TL173 (7).
(6) Remove nut (8), lockwasher (9), and terminal lug TL173
(7) from reverse polarity relay 12V BAT terminal (10).
Discard lockwasher.
(7) Lift dust boot (11) on terminal lug TL174 (12).
(8) Remove nut (13), lockwasher (14), and terminal lug
TL174 (12) from reverse polarity relay 12V LOAD
terminal (15). Discard lockwasher.
(9) Position lockwashers (9 and 14) and nuts (8 and 13) on
reverse polarity relay 12V BAT terminal (10) and 12V
LOAD terminal (15).
(10) Lift dust boot (16) on terminal lug TL168 (17).
(11) Remove nut (18), lockwasher (19), and terminal lug
TL168 (17) from reverse polarity relay 24V BAT terminal
(20). Discard lockwasher.
(12) Lift dust boot (21) on terminal lug TL169 (22).
(13) Remove nut (23), lockwasher (24), and terminal lug
TL169 (22) from reverse polarity relay 24V LOAD
terminal (25). Discard lockwasher.
(14) Position lockwashers (19 and 24) and nuts (18 and 23)
on reverse polarity relay 24V BAT terminal (20) and 24V
LOAD terminal (25).
20-335
