TM 9-2320-365-20-5
20-61. 200 AMP ALTERNATOR TO TERMINAL BLOCK 24 VDC CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire lowered (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (Item 96, Appendix G)
Lockwasher (Item 89, Appendix G)
a. Removal.
(1) Lift dust boot (1) on terminal lug TL2 (2).
NOTE
Remove plastic cable ties as required.
(2) Remove nut (3), lockwasher (4), washer (5), fuse (6),
and terminal lugs TL2 (2) and TL8 (7) from alternator
terminal (8). Discard lockwasher.
(3) Remove alternator to terminal block 24 vdc cable (9)
from dust boot (1).
(4) Loosen clamp (10) on turbocharger intake hose (11).
(5) Remove turbocharger intake hose (11) from intake air
cleaner boot (12).
20-373
