TM 9-2320-365-20-5
20-62. 200 AMP TERMINAL BLOCK TO REVERSE POLARITY RELAY 24 VDC LOAD
CABLE REPLACEMENT (CONT)
(6) Remove nut (10), lockwasher (11), washer (12), and
terminal lug TL167 (13) from terminal block terminal (14).
Discard lockwasher.
(7) Remove 200 amp terminal block to reverse polarity relay
24 vdc load cable (9) from rear side of front lifting beam
(15).
(8) Remove convoluted tubing (16) from 200 amp terminal
block to reverse polarity relay 24 vdc load cable (9).
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Install convoluted tubing (1) on 200 amp terminal block
to reverse polarity relay 24 vdc load cable (2).
(2) Route 200 amp terminal block to reverse polarity relay
24 vdc load cable (2) on rear side of front lifting beam
(3).
20-378
