TM 9-2320-365-20-5
20-63. BATTERY TO 200 AMP TERMINAL BLOCK 12 VDC CABLE ASSEMBLY
REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire lowered (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (Item 89, Appendix G)
a. Removal.
(1) Loosen clamp (1) on turbocharger intake hose (2).
(2) Remove turbocharger intake hose (2) from intake air
cleaner boot (3).
(3) Remove nut (4), lockwasher (5), washer (6), and terminal
lug TL47 (7) from terminal block (8).
Discard
lockwasher.
NOTE
Note routing of battery to 200 amp terminal
block 12 vdc cable prior to removal.
Remove plastic cable ties as required.
(4) Remove battery to 200 amp terminal block 12 vdc cable
(9) from vehicle.
20-381