Home
Download PDF
Order CD-ROM
Order in Print
BATTERY TO 200 AMP TERMINAL BLOCK 12 VDC CABLE ASSEMBLY REPLACEMENT
BATTERY TO 200 AMP TERMINAL BLOCK 24 VDC CABLE ASSEMBLY REPLACEMENT
/.5tonm1078v1-5/TM-9-2320-365-20-5 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
160
161
162
163
164
165
166
167
168
169
170
TM 9-2320-365-20-5
20-63. BATTERY TO 200 AMP TERMINAL BLOCK 12 VDC CABLE ASSEMBLY
REPLACEMENT (CONT)
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Position battery to 200 amp terminal block 12 vdc cable
(1) on vehicle.
(2) Position terminal lug TL47 (2) on terminal block (3) with
washer (4), lockwasher (5), and nut (6).
(3) Tighten nut (6) to 15-19 lb-ft (21-25 N·m).
(4) Position turbocharger intake hose (7) on intake air
cleaner boot (8) with clamp (9).
(5) Tighten clamp (9) to 36-48 lb-in. (4-5 N·m).
c. Follow-On Maintenance.
(1) Connect batteries (para 7-48).
(2) Raise spare tire (TM 9-2320-365-10).
(3) Start engine (TM 9-2320-365-10).
(4) Check VOLTS gage for charge indication (TM 9-2320-
365-10).
(5) Shut down engine (TM 9-2320-365-10).
End of Task.
20-382
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
