TM 9-2320-365-20-5
(6) Loosen clamp (9) on air compressor intake hose (10).
(7) Remove air compressor intake hose (10) from intake air
cleaner boot (11).
(8) Loosen clamp (12) on intake air cleaner boot (11).
(9) Remove intake air cleaner boot (11) from intake air
cleaner housing (13).
(10) Lift dust boot (14) on terminal lug TL80 (15).
(11) Remove nut (16), lockwasher (17), washer (18) and
terminal lug TL80 (15) from terminal block terminal (19).
Discard lockwasher.
(12) Remove dust boot (14) from 200 amp terminal block to
PDP 12 vdc cable (20).
(13) Remove spring pin (21) and suspension compression
plate (22) from suspension compression plate stud (23).
20-387
