TM 9-2320-365-20-5
20-65. 200 AMP TERMINAL BLOCK TO POWER DISTRIBUTION PANEL (PDP) 12 VDC
CABLE REPLACEMENT (CONT)
(8) Install suspension compression plate (13) on suspension
compression plate stud (14) with spring pin (15).
(9) Install dust boot (16) on 200 amp terminal block to PDP
12 vdc cable (1).
(10) Position terminal lug TL80 (17) on terminal block terminal
(18) with washer (19), lockwasher (20), and nut (21).
(11) Tighten nut (21) to 15-19 lb-ft (21-25 N·m).
(12) Position dust boot (16) on terminal lug TL80 (17).
20-390
