TM 9-2320-365-20-5
(10) Unlatch two screws (26) on heater control unit (25).
(11) Remove heater control unit (25) from heater (27).
NOTE
Tag connectors and connection points prior
to removal.
(12) Disconnect connector P4 (28) from connector J4 (29).
(13) Remove two twist locks (30) from heater (27).
(14) Remove eight screws (31) from heater (27).
(15) Remove eight screws (32) from heater (27).
(16) Retain screws (31 and 32) for future use.
WARNING
Heater weighs approximately 120 lbs (54
kgs). Use the aid of an assistant when
lifting. Failure to comply may result in
injury to personnel.
NOTE
Steps (17) through (22) requires the aid of an
assistant.
(17) Position heater (27) on pod panel (33).
(18) Position heater duct (34) on pod panel (33).
20-187