TM 9-2320-365-20-5
(23) Install heater duct (34) on heater (27) with four washers
(51), lockwasher (52), and screws (53).
(24) Install heater duct (34) on heater (27) with four washers
(54), lockwashers (55), and screws (56).
(25) Remove dust cap (57) from fuel overflow port (58).
(26) Remove dust cap (59) from fuel inlet port (60).
(27) Remove dust cap (61) from heater fuel pump power
cable connector (62).
(28) Remove dust cap (63) from heater power connector (64).
(29) Connect connector J314 (65) to heater fuel pump
power cable connector (62).
(30) Install terminal lug TL91 (66) on bracket (35) with washer
(67), lockwasher (68), and screw (69).
(31) Route heater fuel pump power cable (70) through hole
(71) in pod panel (33).
20-189
