TM 9-2320-365-20-5
23-4. INVERSION VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Antiseize Compound (Item 63, Appendix D)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
(1) Disconnect two air hoses (1) from 90-degree fittings (2).
(2) Remove inversion valve (3) from fitting (4).
(3) Remove two 90-degree fittings (2) from inversion valve
(3).
Change 1
23-11
