Vehicle must be empty when making
(1) Connect batteries (para 7-48).
(2) Position vehicle on level surface with both headlights
approximately 36 in. (91 cm) from headlight adjustment
screen with vertical lines (1) directly in front of bumper
(3) Turn headlights on LOW beam (TM 9-2320-365-10).
(4) Observe headlight spots on headlight adjustment screen.
If headlight spots are within squares (3), alignment is
Perform steps (5) and (6) if headlights need
(5) Adjust screw (4) to move headlight spot up or down.
(6) Adjust screw (5) to move headlight spot left or right.
(7) Turn off headlights (TM 9-2320-365-10).
End of Task.