23-7. WET TANK REPLACEMENT (CONT)
Vehicles may be equipped with either
corrosive enhanced clamps or non-
corrosive enhanced clamps.
enhanced clamps have a self-locking nut
and cork lining. When removing a non-
corrosive enhanced clamp, replace it with
a corrosive enhanced clamp.
Perform steps (3) through (5) on vehicles
not equipped with corrosive enhanced
(3) Remove two screws (5) from clamps (6).
Note the orientation of wet tank prior to removal.
(4) Remove wet tank (2) from two clamps (6).
(5) Remove two clamps (6) from battery box (7). Discard