TM 9-2320-365-20-5
23-8. PRESSURE SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
21, Appendix D)
Antiseize Compound (Item 14, Appendix D)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Tag connectors prior to removal.
(1) Disconnect connector P84 (1) from pressure switch (2).
(2) Remove pressure switch (2) from 90-degree fitting (3).
Change 1
23-35