TM 9-2320-365-20-1
2-327
VOLTAGE TEST
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
WARNING
(1) Remove instrument panel assembly for access
(para 7-15).
(2) Disconnect connector clamp from engine oil
pressure gage connector.
(3) Disconnect connector PX6 from engine oil
pressure gage connector.
(4) Set multimeter to volts dc.
(5) Connect positive (+) probe of multimeter to
connector PX6-3.
(6) Connect negative (-) probe of multimeter to
ground.
(7) Position master power switch to on
(TM 9-2320-365-10) and note reading on
multimeter.
(8) If 24 vdc is not present, repair wire 1546
(para 2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
(9) Position master power switch to off
(TM 9-2320-365-10).