TM 9-2320-365-20-2
3-6. ENGINE AND TRANSMISSION SAMPLING VALVE REPLACEMENT (CONT)
(7) Position engine oil sampling valve (8) on bracket (9) with
nut (10).
(8) Position transmission oil sampling valve (11) on bracket
(9) with nut (12).
(9) Tighten nuts (10 and 12) to 67 lb-in. (8 N·m).
(10) Install engine oil sampling hose (3) on engine oil
sampling valve (8).
(11) Install transmission oil sampling hose (7) on transmission
oil sampling valve (11).
c. Follow-On Maintenance.
(1) Lower cab (TM 9-2320-365-10).
(2) Check for oil leaks under vehicle.
(3) Start engine (TM 9-2320-365-10).
(4) Raise cab (TM 9-2320-365-10).
(5) Check for oil leaks around transmission and engine oil
sampling hoses and valves.
(6) Lower cab (TM 9-2320-365-10).
(7) Shut down engine (TM 9-2320-365-10).
End of Task.
3-18
