TM 9-2320-365-20-2
3-7. ENGINE OIL FILL TUBE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Transmission oil fill tube removed (para 8-13).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Screwdriver Attachment, Socket Wrench (Item 46,
Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix
C)
Socket Set, Socket Wrench (Item 35, Appendix
C)
Materials/Parts
Nut, Self-Locking (2) (all models except M1081)
(Item 148, Appendix G)
Nut, Self-Locking (M1081) (Item 148, Appendix
G)
a. Removal.
(1) Remove cap (1) from engine oil fill tube (2).
NOTE
Perform steps (2) and (3) on all models
except M1081.
(2) Remove self-locking nut (3), washer (4), engine oil fill
tube (2), screw (5), and washer (6) from radiator
overflow tank bracket (7). Discard self-locking nut.
(3) Remove self-locking nut (8), washer (9), engine oil fill
tube (2), screw (10), and washer (11) from front lifting
beam (12). Discard self-locking nut.
3-19
