Change 1 2-1181
TM 9-2320-365-20-2
CONTINUITY TEST
(1) Disconnect AC power (TM 9-2320-365-10).
(2) Remove six screws and cover from 110/208
VAC POWER DISTRIBUTION PANEL.
(3) Loosen screw in terminal board TB4.
(4) Remove wire 1499B from terminal board
TB4.
(5) Set multimeter to ohms.
(6) Connect positive (+) probe of multimeter
to wire 1499B.
(7) Connect negative (-) probe of multimeter
to neutral pole of 110 VAC receptacle J232
and note reading on multimeter.
(8) If continuity is not present, repair or replace
wire 1499B (para 2-40).
