TM 9-2320-365-20-2
2-1309
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
right end of fuse holder.
(3) Connect negative (-) probe of multimeter to
connector P173-G and note reading on
multimeter.
(4) Connect negative (-) probe of multimeter to
connector P173-H and note reading on
multimeter.
(5) If continuity is not present at connector P173-G
and/or P173-H, repair wire 1507 (para 2-40) or
replace M1079 12/24 vdc power cable
(para 7-51).
(6) Install fuse in fuse holder on M1079 12/24 vdc
power cable.
(7) Close fuse holder.
