TM 9-2320-365-20-2
2-1311
CONTINUITY TEST
(1) Loosen screw in cover.
(2) Open cover on relay box assembly.
(3) Set multimeter to ohms.
(4) Connect positive (+) probe of multimeter to
connector J173-G.
(5) Connect negative (-) probe of multimeter to
circuit breaker CB11 wire 1507 and note reading
on multimeter.
(6) Connect positive (+) probe of multimeter to
connector J173-H and note reading on
multimeter.
(5) If continuity is not present at connector J173-G
and/or J173-H, repair wire 1507 (para 2-40).
