f8. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 43 AND ANY SUB CODE
TEST OPTIONS
REASON FOR QUESTION
If continuity is not present, or
short circuits are found, WTEC
II cab transmission harness is
faulty.
KNOWN INFO
Transmission oil level OK.
Fuse OK.
Batteries OK.
POSSIBLE PROBLEMS
Faulty WTEC II cab
transmission harness.
Faulty WTEC II TEPSS.
START
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
Tools and Special Tools (Cont)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
STE/ICE-R (Item 39, Appendix C)
References
TM 9-4910-571-12&P
TM 9-2320-365-20-2
2-1404 Change 1
Continuity Test or
STE/ICE-R Test #91
1.
Is continuity present, and
short circuits absent, on
transmission solenoid
circuits from connector J119
to connector J114?
CAUTION
Read CAUTION
on following page.
NO
YES
Replace WTEC II cab transmission
harness (para 7-86).
