TM 9-2320-365-20-3
15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT)
NOTE
Both rear stabilizer bar attachments are
removed the same way. Right side shown.
(2) Remove self-locking nut (2), bolt (3), two washers (4),
and washer (5) from frame bracket (6). Discard self-
locking nut.
(3) Remove self-locking nut (7) and bolt (8) from axle
bracket (9). Discard self-locking nut.
(4) Perform steps (2) and (3) on left side rear stabilizer bar
attachments.
WARNING
Rear stabilizer bar weighs approximately
50 lbs (22 Kg). Rear stabilizer bar must
be supported during removal. Failure to
comply may result in serious injury to
personnel or damage to equipment.
NOTE
Step (5) requires the aid of an assistant.
(5) Remove rear stabilizer bar (1) from vehicle.
15-8