TM 939
-2320-365-20-3
c. Resilient Mount Removal.
(1) Position mechanical stop (1) in vise.
(2) Remove nut (2), spring washer (3), bolt (4), and resilient
mount (5) from mechanical stop (1). Discard spring
washer.
d. Resilient Mount Installation.
(1) Position resilient mount (5) on mechanical stop (1) with
bolt (4), spring washer (3), and nut (2).
(2) Tighten nut (2) to 35-46 lb-ft (47-63 N·m).
(3) Remove mechanical stop (1) from vise.
e. Front Angle Bracket Resilient Mount Removal.
15-3
NOTE
Left and right side front angle bracket
resilient mounts are removed the same way.
Right side shown.
Remove nut (1), spring washer (2), bolt (3), and resilient
mount (4) from front angle bracket (5). Discard spring
washer.
f. Front Angle Bracket Resilient Mount Installation.
NOTE
Left and right side front angle bracket
resilient mounts are installed the same way.
Right side shown.
(1) Position resilient mount (4) on front angle bracket (5)
with bolt (3), spring washer (2), and nut (1).
(2) Tighten nut (5) to 35-46 lb-ft (47-63 N·m).
g. Follow-On Maintenance.
Lower cab (for front angle bracket resilient mount only) (TM
9-2320-365-10).
End of Task.
